Snmp Configuration; Figure 3-4. Snmp Configuration Screen; Table 3-3. Snmp Configuration Screen Fields - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch

SNMP Configuration

The SNMP Configuration screen (Figure 3-4) allows you to set or modify the
SNMP configuration parameters.
Choose SNMP Configuration (or press m) from the main menu to open the SNMP
Configuration screen.
Read-Only Community String:
Read-Write Community String:
Trap #1 IP Address:
Community String:
Trap #2 IP Address:
Community String:
Trap #3 IP Address:
Community String:
Trap #4 IP Address:
Community String:
Authentication Trap:
AutoTopology:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 3-4. SNMP Configuration Screen
Table 3-3 describes the SNMP Configuration screen fields.
Table 3-3. SNMP Configuration Screen Fields
Field
Read-Only
Community String
3-14
SNMP Configuration
[ public ]
[ private ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ Enabled
[ Enabled
Description
The community string used for in-band read-only SNMP operations.
Default public
Range Any ASCII string of up to 32 printable characters
]
]
Press Ctrl-C to return to Main Menu.
(continued)
309978-D Rev 01