Chapter 28 Snmp Configuration; Snmp Configuration; Figure 28-1 Menu 22: Snmp Configuration; Table 28-1 Snmp Configuration Menu Fields - Nortel Contivity 221 User Manual

Chapter 28

SNMP Configuration

SNMP is only available if TCP/IP is configured.
SNMP Configuration
28.1
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration
as shown next. The "community" for Get, Set and Trap fields is SNMP terminology for
password.

Figure 28-1 Menu 22: SNMP Configuration

SNMP:
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.

Table 28-1 SNMP Configuration Menu Fields

FIELD
Get Community Type the Get community, which is the password for the incoming
Get- and GetNext requests from the management station.
Set Community Type the Set community, which is the password for incoming Set
requests from the management station.
This chapter explains SNMP configuration menu 22.
Menu 22 - SNMP Configuration
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
DESCRIPTION
Contivity 221 VPN Switch User's Guide
28-1
EXAMPLE
Public
(default)
Public
(default)