Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
2 2 H a r d w a r e
H a r d w a r e I n s t a l l a t i o n
2.1
Overview
The manageable Mosaic switch features a compact design with a low mounting depth that fits into
standard 45x90 or larger faceplates and ducts. Installation of the manageable Mosaic switch includes
the following recommended steps:
Mount the manageable Mosaic switch external PS (Power Supply) in the duct and connect the
•
PS to the main power
Connect the DC connector of the PS to the manageable Mosaic switch (the manageable
•
Mosaic switch should start booting)
Performing initial IP configuration of the specific device:
•
a. Connecting a PC/laptop via LAN cable to any manageable Mosaic switch port and setting the
IP parameters via the LCS
b. Connecting a PC/laptop via the manageable Mosaic switch special RS232 serial cable
(optional) to the CLI connector of the manageable Mosaic switch, performing manageable
Mosaic switch restart and following the options.
After the IP parameters are set, connect the manageable Mosaic switch to the network (via the
•
F/O uplink and/or copper uplink/daisy-chain ports)
I n s t a l l a t i o n
2
- FTTO Init application.
SUMMARY
Page 13 of 87
Advertisement
Table of Contents
