Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Table 3-2 Port Configuration Options
Parameter
MAC Security:
(Copper ports only)
QoS:
(Copper ports only)
Statistics:
SFP: (SFP ports only)
NOTE: On SFP ports, the connector type and other physical descriptions of the port are
found in the SFP tab only, and not in the Properties tab
3.3.2 Configuring the Port Name
Each port can be named in order to identify the user or device connected to that port. In the specific
Port View window, click the Name field to enter the new value and then click Apply.
3.3.3 Factory Default Port Settings
The device ports are factory preset with the following default values:
Table 3-3 Factory Default Port Configuration Values
Parameter
10/100/1000BaseT copper ports:
Description
Allows individual ports to be disabled.
Allows setting the Quality of Service parameters of
the port.
Displays various statistics regarding traffic, port
usage, and packets.
Contains specific information concerning the type of
SFP connector in the port, including type, bit rate,
wavelength, vendor, model type and serial number
Description
Status – On
Auto Negotiate – Enabled
Speed – Depends on A/N results
Duplex – Depends on A/N results
MDI – Auto
Flow Control – Enabled
PoE – Disabled on external user ports
SUMMARY
Page 18 of 87
Advertisement
Table of Contents
