5
Hardware Operation
The front panel of the AGS-1024 switch features one Power LED as well as a
Link/Activity LED for each port. The back panel of the switch includes (24)
10/100/1000 Mbps RJ-45 ports, a power connector, and a switch to select blue
or green front-panel LEDs. Each Ethernet port has one LED to indicate Link/
Activity as well as connection speed.
Status Indicators
The following table describes the LED functionality for both front and
back indicators:
Front
Indicator
State
Power
On
Off
Link/Act
On
Flashing
Off
AGS-1024 Front Panel
Description
The AGS-1024 is switched on.
AGS-1024 is switched off or not connected to AC
power. Check power connections and power switch
at on the rear of the unit.
Device connected to the port.
Port is receiving or transmitting data.
No device connected to the port or the device is off.