Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
6.2
Device Level – Event Log
6.2.1 Viewing Recorded Events
The last 64 events are stored in the device and are available for display at any time through the Event
Log window, located at the bottom of the Embedded web interface main screen. The Event list is
cleared when turning on or resetting the device.
When a management application is continuously managing the device, an unlimited number of events
are displayed for the currently managed device. If the management application disconnects from the
device and reconnects, only the last 64 events that are stored in the device are uploaded to the Event
Log.
Only events occurring on the network ports of the device are recorded. Configuration changes that are
initiated by the network manager are not considered events.
The viewed events may be acknowledged and filtered according to various user defined criteria. The
events recorded are:
Major Events:
Device voltage: changes that exceed the thresholds and return to limits.
•
Internal temperature of the device: changes that exceed the thresholds and return to
•
normal.
NOTE: Thresholds levels may be modified by technician level access.
Port Locked due to security definitions: when an unauthorized MAC address connects
•
to a MAC Secured port.
Minor Events:
There are currently no events defined as Minor in the manageable Mosaic switch.
•
Notify Events:
Change in Port status: Link up, Link down.
•
System startup
•
To get a full view of the Event Log window user need to click the arrow on its top right
corner.
Figure 6-2 Event Log window
SUMMARY
Page 69 of 87
Advertisement
Table of Contents
