Device Management - LEGRAND Mosaic Manageable switch Installation And Configuration Manual

Gigabit poe
Table of Contents

Advertisement

Manageable Mosaic switch Installation and User Guide
3 3 D e v i c e M a n a g e m e n t
D e v i c e M a n a g e m e n t
3.1
Overview
The manageable Mosaic switch can be managed remotely through the Embedded web interface EMS
(Element Management System) application via any Web browser or via Telnet.
The Embedded web interface EMS application can be installed on any computer running a Windows 98
/ 2000 / XP / Vista / 7 platform, Linux or Solaris. This software requires prior installation of the Java
JRE1.6 minimum.
Remote management can also be conducted from any Web browser which has access to the Legrand
device network. The Web browser launches a complete Embedded web interface GUI using a Java
applet (see Section 3.2).
The device may also be managed via Telnet (see Section 8).
3.1.1 User Names / Access Levels and Passwords
Each Embedded web interface session, is accessed by logging in using one of three user names,
representing access levels, and its respective password. Factory default passwords are available for
each user name.
User Name / Access Level
Guest
Admin
Technician
Service Center
CLI password
Table 3-1 User name access level and password
The four user names (access levels) are as follows:
• Guest– Allows only monitoring and viewing the configuration and status
information. Password, configuration and traps option are not accessible at this
level. Default password is guest.
• Admin– Allows access to all configuration options except for service options such
as power supply thresholds and Technician's password (accessible by Technician
level). Default password is admin.
• Technician – Allows access to all configuration options and to service options such
as temperature and power supply thresholds. Also, login as a Technician to gain
access to the System Configuration window Firmware Update tab. A Technician
can change the password for all other user levels, and change default factory
settings. The default password is tech.
• Service Center – Not available in this version.
Default Password
guest
admin
tech
Not Available
mypass
SUMMARY
Page 14 of 87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Area box distribution switch

Table of Contents