Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
In addition to RMON information, statistics for RX packets and counters for TX packets can be
monitored for each port.
To display the port RMON information, RX statistics and TX counter:
1. From the Embedded web interface main screen, click the icon of the Port of interest.
The Port View window appears.
2. From the Port View window, select the Statistics tab.
NOTE: Click Reset to ZERO all counters.
Figure 6-4 Port Statistics and Counters
6.4
Port Monitoring
The port monitoring feature enables analyzing and recording valid data on a port by mirroring its traffic
to another, user allocated (monitoring destination) port. User may monitor the egressing, or both
ingressing and egressing data of any port. This feature can be used for network analysis as well as
recording port traffic.
More than one port can be monitored on a single monitoring destination port. To assure the integrity of
the monitored data and since the monitoring port bandwidth is limited to 100Mbps, flow control is
automatically activated on the monitored port(s) when the monitored traffic exceeds 100Mbps.
To configure port monitoring:
1. From the Embedded web interface main screen, click on the icon Port to be
monitored. The Port View window appears.
2. From the Port View window, click Monitor tab.
SUMMARY
Page 72 of 87
Advertisement
Table of Contents
