Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
3.5.6 RADIUS Server
Figure 3-18 System View menu, RADIUS Server tab
The RADIUS Server tab displays the current RADIUS server details. RADIUS server details can be
edited from a Telnet connection. RADIUS authentication supported EAP-MD5 only.
3.5.7 Remote Software Reset
The unit may be remotely reset at any time. Reset is required, for example, after a new software version
is uploaded. (The unit may also be locally reset by disconnecting and reconnecting the power or
pressing the front panel Reset push button, located at the left corner of the right user identification
marking slide. For more details see Figure_12).
NOTE: Reset can also be done through Telnet (Section 8).
Figure 3-19 System menu, Commands tab
To reset the unit (from a Technician or Administrator level only):
1. From the Commands tab, click Reset Device. A confirmation window appears. Click
Yes to confirm.
3.6
Features Menus
3.6.1 Global Configuration
Learning - Switch Learning is always enabled and cannot be configured in this device.
•
Aging time –. Aging time can be set to 16 seconds, 300 seconds (5 minutes), 1800 seconds
•
(30 minutes) or No Aging. The Factory default aging settings is 300 sec.
NOTE: No Aging means the MAC addresses in the look-up table will not be removed
automatically
Priority Policy – Set the desired priority to select between two options 8421 and 1111. In case
•
of 1111 there is equal priority in the queuing and forwarding frames. In case of 8421, a
weighted fair queuing scheme is applied to the four priority output queues: eight frames from
SUMMARY
Page 36 of 87
Advertisement
Table of Contents
