Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Important Notice
© 2012 by Legrand
This document provides the required information for the manageable Mosaic switch. It is intended for
network administrators who are responsible for installing and setting up network equipment.
This document contains confidential and proprietary information of Legrand and may not be copied,
transmitted, stored in a retrieval system or reproduced in any format or media, in whole or in part,
without the prior written consent of Legrand. Information contained in this document supersedes any
previous manuals, guides, specifications, data sheets or other information that may have been provided
or made available to the user. This document is provided for informational purposes only, and Legrand
does not guarantee the accuracy, adequacy, quality, validity or completeness of the information
contained in this document. Legrand reserves the right to make updates, improvements and
enhancements to this document and the products to which it relates at any time without prior notice to
the user. IN NO EVENT SHALL Legrand BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST
PROFITS, ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED
HEREIN, OR THE USE OF THE PRODUCT, EVEN IF Legrand HAS BEEN ADVISED OF, KNOWN,
OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.
Trademark Acknowledgement
This document contains trademarks, trade names and service marks of Legrand and other
organizations, all of which are the property of their respective owners.
Warnings and Cautions
Before configuring your device, please download the latest firmware from the following website
http://www.wifi.legrandelectric.com
Warning: for Telnet configuration please read chapter 8 "Telnet" before connecting.
To avoid the possibility of severe and potentially fatal electric shock, never install electrical
devices in a wet location or during a lightning storm. Only a qualified electrician should connect
electrical devices.
If equipped with a laser based SFP tranceiver
Fiber optic port of the 0 779 05 switch includes 1310/1550nm Class 1 laser components certified
according to IEC 60825-1 transmitting invisible laser radiation.
DO NOT stare into the beam or view directly with optical instruments.
Fiber optic port of the 0 779 05 switch includes 1310/1550nm Class 1 laser components certified
•
Avoid direct exposure to beam.
according to IEC 60825-1 transmitting invisible laser radiation.
•
Do not remove the protective covers on the fiber optic connectors until you are
DO NOT stare into the beam or view directly with optical instruments.
•
•
ready to connect the fiber optic cables.
Avoid direct exposure to beam.
•
When dealing with fiber optic cables, please ensure that the TX at one end of the
Do not remove the protective covers on the fiber optic connectors until you are
•
•
link is connected to the RX at the other end of the F/O link.
ready to connect the fiber optic cables.
When dealing with fiber optic cables, please ensure that the TX at one end of the
•
link is connected to the RX at the other end of the F/O link.
The RJ45 ports are shielded RJ45 data sockets (Ethernet connections). They cannot be used as
analogue telephone or other sockets. The CLI (RS232) socket cannot be used for USB
connections.
The RJ45 ports are shielded RJ45 data sockets (Ethernet connections). They cannot be used as
analogue telephone or other sockets. The CLI (RS232) socket cannot be used for USB
and update your device with this firmware.
ELECTRICAL WARNING
LASER WARNING
LASER WARNING
PORT & SOCKET WARNING
PORT & SOCKET WARNING
FOR INDOOR USE ONLY
II
Advertisement
Table of Contents
