Manageable Mosaic Switch Shipped Components - LEGRAND Mosaic Manageable switch Installation And Configuration Manual

Manageable Mosaic switch Installation and User Guide
1.3

Manageable Mosaic switch Shipped Components

The manageable Mosaic switch is shipped with the following components:
Manageable Mosaic switch
•
Mosaic power supply.
•
1.4 Front & Side panel components
manageable Mosaic switch front panel contains LED indicators for Ports 1–4 as well as for the Uplink Ports
(Power, Management and the PoE LEDs are also located on the front panel.
Port 1 L/A & Port 2 L/A &
PoE LEDs
PoE LEDs
Power LED
(1) To press the Reset button user needs to remove first the user identification marking slide. Use
narrow tool such as
(few seconds) will force to unit to switch to the default factory settings.
User Identification
Marking Slides
Management
LED
Uplink 2 L/A LED
Figure 1-2 manageable Mosaic switch Front view
needle to press the button. Keeping the button pressed for a long period
SUMMARY
Reset
(1)
Internal Port 3 L/A &
Push button
PoE LEDs
Uplink 1 L/A LED
Port 4 L/A &
PoE LEDs
CLI Connector (reserved)
Uplink 1 RJ45 Port
Uplink 2 SFP Port
Main DC Power
Connector
Page 10 of 87