Manageable Mosaic switch Installation and User Guide
Figure 7-7 System Configuration window, General tab
1. From the Embedded web interface main screen, click System. The System View
window appears.
2. From the System View window Inventory tab find the MAC Address of your
device.
NOTE: Each feature is represented by a single letter which is case sensitive.
3. Supply Legrand Representative with the MAC Address exactly as it appears in the
Inventory tab and Feature(s) already installed on device, as well as the special
add-on feature(s), to be purchased.
4. Legrand Representative will supply with the feature letter(s) and a license key
code which activates the old feature(s) (if any) plus the new feature(s) being
purchased.
7.6.1 Activating the Special Add-on Feature(s) License Key
After receiving the feature letter(s) and licensing key from Legrand Representative (as explained in
the previous section) activate the feature(s) via the Embedded web interface or Web management
application as explained below:
1. Login to the Embedded web interface or Web management application as a
Technician or Admin.
2. From the Embedded web interface main screen, click Management. The
Management window appears.
3. From the Management window, License tab, Click on the Features field and type the
letter(s) for each licensed feature as given by Legrand representative.
NOTE: The letters are case sensitive and should be entered as a string without any
intervening spaces or punctuation.
4. Click on the Key field and enter the license key exactly as received it from Legrand
Representative (it is recommended to cut-and-paste the license key to avoid font and
case problems) then click Apply.
Figure 7-8 Firmware License Tab
SUMMARY
Page 80 of 87