Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Table 3-6 PoE Parameters
Parameter
Consumption
Voltage
3.3.5.2 PoE Power Capacities
The total power capacity of all four PoE ports combined cannot exceed 50 Watts.
Consequently, when connecting PD devices to the ports, the device detects its class
and provides PSE power to the port only if the device can allocate enough power to
that port within the total 50 Watt limitation.
3.3.5.3 manageable Mosaic switch PoE LED Indicators
The existence of the LED itself indicates that the port is PoE Capable. Ports with no
PoE capabilities have no PoE LEDs.
On a PoE capable switch there are three possible PoE LED indications: OFF,
BLINKING and ON (steady illumination).
A: PoE LED OFF: Indicates that PoE is administratively disabled on this port. This can
be changed through the PoE tab in the Port View window.
B: PoE LED BLINKING: Indicates that PoE is enabled on the port, but no PD is
connected.
C: PoE LED ON (steady illumination): A PD device is detected on the port(s) and PSE
power is provided to those port(s).
3.3.6 MAC Security
There are two modes of MAC security:
MAC Access Security is locally authenticated according to the approved MAC
•
The Approved MAC is authenticated by the Radius server before continuing with the
•
MAC Access Security process.
The MAC security mode is selected only through the Telnet application. See Section 8.5.
Description
4
As Class 0
Displays the actual power being consumed by the PD device
connected to the port.
Displays the voltage supplied by the PoE Power Supply to
the manageable Mosaic switch.
SUMMARY
4
30.0 Watts
Page 24 of 87
Advertisement
Table of Contents
