Table of Contents
Advertisement
Hardware Setup
In This Chapter
Before You Begin......................................................................................................... 7
Safety Instructions.......................................................................................................7
Tampering Prevention and Detection......................................................................... 8
Using Qualified Peripheral Devices Only.....................................................................8
Secure Installation Guidelines...................................................................................10
Secure Administrative Operation..............................................................................11
Before You Begin
Before using the Secure Switch, make sure you have read
Safety Instructions
•
This product is for indoor use only.
•
Read all of these instructions. Save them for future reference.
•
Follow all warnings and instructions marked on the device.
•
Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious
damage will result.
•
Do not use the device near water.
•
Do not place the device near, or over, radiators or heat registers.
•
The device cabinet allows for adequate ventilation. To ensure reliable operation, and to protect
against overheating, the cabinet must never be blocked or covered.
•
The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its
ventilation. Likewise, the device should not be placed in a built in enclosure unless adequate
ventilation has been provided.
•
Never spill liquid of any kind on the device.
•
Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
•
The device should be operated from the type of power source indicated on the marking label. If you
are not sure of the type of power available, consult your dealer or local power company.
•
The device is designed for IT power distribution systems with 100-240V, 1A, 50-60 Hz input line
voltage.
•
To prevent damage to your installation it is important that all devices are properly grounded.
•
The device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
attempt to defeat the purpose of the grounding-type plug. Always follow your local/national wiring
codes.
•
Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that
they cannot be stepped on or tripped over.
Attention
(on page 5).
7
Advertisement
Table of Contents
