Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Figure 6-5 Port View window, Monitor tab
3. Select the Port Monitoring Mode from the Mode list described in the following
table:
Table 6-1 Port Monitoring Mode Options
Option
None
Egress Only
Egress & Ingress
NV Egress Only
NV Egress & Ingress
4. Select the destination port from the Destination list and click Apply.
Description
Port monitoring mode not enabled.
Only egress frames are copied to the destination port.
When the device is reset, the monitoring mode resets to
None.
Egress and ingress frames are copied to the destination port.
When the device is reset, the monitoring mode resets to
None.
Only egress frames are copied to the destination port.
Mode remains on after system reset.
Egress and Ingress frames are copied to the destination port.
Mode remains on after system reset.
SUMMARY
Page 73 of 87
Advertisement
Table of Contents
