Table of Contents
Advertisement
18.B. Installation Procedure
If an injector system was ordered after the initial purchase and receipt of the
GloMax
®
-Multi+ Detection System, follow all steps of the installation
instructions. If the injector system was received with the GloMax
Detection System, skip installation Steps 3–6.
Figure 57. A complete injector system on top of the GloMax
System.
1. Turn off the GloMax
Detection System.
2. Place the Injector System
Console on top of the
instrument, with the four
rubber feet on the injector
system level and located firmly
inside the indentation (see
arrow).
3. Remove the black rectangular
plate located behind the touch
screen by loosening the two
screws with the provided Allen
wrench.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526 · Phone 608-274-4330 · Fax 608-277-2516 · www.promega.com
Part# TM311
Page 64
®
-Multi+
®
-Multi+
®
-Multi+ Detection
Printed in USA.
Revised 5/10
Advertisement
Table of Contents
