Table of Contents
Advertisement
4.B. Buttons on the "Read" Screen
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526 · Phone 608-274-4330 · Fax 608-277-2516 · www.promega.com
Printed in USA.
Revised 5/10
•
"Protocol" button.
•
Touch the white text button to see the list of
preset and user-defined protocols.
•
"Plate Mapping" button and well selection
indicator.
•
Touch the button to specify which wells are to be
read.
•
Green wells are selected for reading.
•
Gray wells are deselected and will not be read.
•
In Luminescence mode, this button enables
"Kinetic Mode".
•
In Absorbance mode, the "Wavelength" button
enables single or dual wavelengths.
•
Starts a run.
•
Activates the PMT before starting a luminescence
run.
•
PMT activation is required before the first
luminescence run of the day.
•
The "Setup" button appears when injectors
are connected.
•
Prepares the injector(s) for a prime, a flush and a
reverse purge.
•
Touch one of the "Injector" buttons to activate the
injector(s).
•
Green indicates the injector is selected.
•
Gray indicates the injector is deselected.
•
Button for keypad entry.
•
Used in the "User Protocol" screen to enter a
protocol name.
•
"Incubation" button.
•
"Shaking" button.
•
"Dispense" button.
Part# TM311
Page 9
Advertisement
Table of Contents
