D Sending A Call To A Destination - Icom IC-F5400DP Series Operating Manual

3
BASIC OPERATION
Receiving and transmitting

D Sending a call to a destination

When a tone frequency (2-Tone) or code (5-Tone)
is preset in the Call List, a user can select it as a
destination�
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1� Push [Call List Select] to display the "Call List
Select" screen�
2� Push [Up] or [Down] to select a destination�
3� After selecting, push [OK].
• Returns to the Standby screen�
4� Push [Call] to make a call to the selected
destination�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Signaling/Call > Call List Select)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select "Signaling/Call,"
then push [OK]�
3� Push [Up] or [Down] to select "Call List Select,"
then push [OK]�
4� Push [Up] or [Down] to select a destination, then
push [OK]�
• Sets the selected destination�
5� Hold down [Back] for 1 second to return to the
standby screen�
6� Push [Call] to make a call to the selected
destination�
3-9