Appendix 7.2 Precautions When Using "Parameter Backup/Restoration Tool - Mitsubishi Electric Q81BD-J61BT11 User Manual

APPENDIX

Appendix 7.2 Precautions when using "Parameter backup/restoration tool"

Backup target
CC-Link Ver.1 board
(SWnDNF-CCLINK-B)
CC-Link Ver.2 board
(SW1DNC-CCBD2-B)
1: The parameter added to the SW1DNC-CCBD2-B Version 1.17T or later will be considered as default value.
App - 61
The following are the precautions for using the "Parameter backup/restoration tool."
(1) Precautions when activating "Parameter backup/restoration tool"
Back up or restore parameters with the CC-Link Utility already installed.
(2) Restrictions on restoration
The following table shows whether backed-up parameters can be restored or not
for each case.
Mode
Ver.1
mode
Ver.1
mode
Ver.2
mode
Additional
mode
(3) File name and file path entered when backing up parameters
The following table shows the maximum number of characters that can be
entered and the characters not to be used when entering file names and file
paths.
File Name Length/Path Length
255 characters
: Can be restored
Restoration target
CC-Link Ver.1 board
(SWnDNF-CCLINK-B)
1
Illegal Characters
MELSEC
: Cannot be restored
CC-Link Ver.2 board
(SW1DNC-CCBD2-B)
1
1
: < > ? | "
App - 61