11 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATION
11.2.5 Executing the data link
11 - 15
Turn ON the remote device stations and the master station in this order, and then start
the data link.
(1) Checking the data link status
The following describes how to check the operation status of the master station
and remote device stations under normal data link condition.
(a) Checking the master station
How to check the master station is the same as in the remote net Ver.1
mode.
Refer to Section 11.1.5 (1) (a).
(b) Checking remote device stations
How to check the remote device stations is the same as in the remote net
Ver.1 mode.
Refer to Section 11.1.5 (1) (b).
For the AJ65VBTCU-68DAVN, check the identical location as the LEDs on
the AJ65VBTCU-68DAV.
MELSEC
11 - 15