10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
I/O STATIONS
10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
I/O STATIONS
This section gives a system configuration example to explain the CC-Link Ver.2 board
and remote I/O station setting, parameter setting, programming and operation check.
10.1 Configuring a System
In this example, a system consisting of a master station and two remote I/O stations as
shown below is used.
10 - 1
Master station
Personal
computer
Q80BD-J61BT11N
Q81BD-J61BT11
Remote I/O station (station No. 1)
AJ65SBTC1-32D1
Input module
+
Terminal resistor
Remote I/O station (station No. 2)
AJ65SBTC1-32T
Output module
Terminal resistor
MELSEC
10
10 - 1