Mitsubishi Electric Q81BD-J61BT11 User Manual page 244

16 TROUBLESHOOTING
16 - 10
(1) Precautions for installing other optional board
Executing user program (including the device monitor utility) for each board
simultaneously under the following condition may cause an error. When an error
occurs in the user program, take the action shown below.
<Condition>
A personal computer into which the CC-Link Ver.2 board and other optional
board are installed and where the resources were allocated automatically by
Plug-and-Play is used.
<Action>
• Change the positions where the CC-Link Ver.2 board and other optional board
are installed.
• In the BIOS setup, exchange the IRQs between the CC-Link Ver.2 board and
other optional board or change their IRQs.
MELSEC
16 - 10