12 COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL
STATIONS
12 COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL
STATIONS
This section gives a system configuration example to explain the CC-Link Ver.2 board
and local station setting, parameter setting, programming and operation check.
12.1 When Using the Remote Net Ver.1 Mode
The following describes communications in the remote net Ver.1 mode.
12.1.1 Configuring the system
In this system, one local station shall be connected.
12 - 1
Master station
Personal
computer
+
Q80BD-J61BT11N
Q81BD-J61BT11
Terminal resistor
Personal
computer
Occupies 4 stations
Local station (station No. 1)
+
Q80BD-J61BT11N
Q81BD-J61BT11
Terminal resistor
MELSEC
12
12 - 1