Mitsubishi Electric Q81BD-J61BT11 User Manual page 271

Network interface board melsec cc-link system master/local interface board
Table of Contents

Advertisement

APPENDIX
App - 9
(4) Link special registers (SW)
The link special registers store the data link status using word data.
Buffer memory addresses 600
SW0000 to SW01FF.
For more details on the link special registers (SW0000 to SW01FF), refer to
Appendix 2.2.
(5) Slave station offset and size information
For the remote net ver.2 mode and the remote net additional mode,
RX/RY/RWw/RWr assignment to station numbers varies depending on the
expanded cyclic setting and the remote I/O station points setting.
(a) Offset
Head buffer memory addresses of RX/RY/RWw/RWr assigned to each
station are stored.
When two or more stations are occupied, values are stored to the head
buffer memory address of the station only. (When the station No. 1
occupies 2 stations, values are stored to RX/RY/RWw/RWr offset and size
of station No. 1 only. RX/RY/RWw/RWr offset and size of station No. 2 are
remained as default.)
to 7FF
correspond to link special registers
H
H
MELSEC
App - 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q80bd-j61bt11n

Table of Contents