8 OPERATING THE UTILITY SOFTWARE
8.2.7 Operating the Memory I/O test screen
1)
2)
Item
1) Channel No.
2) Diagnoses
3) Start button
4) Stop button
5) Reset board button
8 - 13
The Memory I/O test screen diagnoses the dual-port memory and I/O port used by the
CC-Link Ver.2 board.
POINT
(1) Before starting a diagnostic operation, be sure to disconnect the external cable.
(2) To switch windows during a diagnostic operation, click the Stop button to
stop the diagnosis and then switch screens.
Select the channel to be diagnosed.
Displays the addresses of the 2-port memory and I/O port being diagnosed, the number of
diagnoses and the status.
Starts the 2-port memory and I/O port diagnosis on the selected channel.
Stops the currently executing 2-port memory and I/O port diagnosis, and updates the count
and status.
Resets the CC-Link Ver.2 board.
Description
MELSEC
5)
3)
4)
8 - 13