Increasing The Number Of Cyclic Points (Remote Net Ver.2 Mode, Remote Net Additional Mode) - Mitsubishi Electric Q81BD-J61BT11 User Manual

4 FUNCTIONS
4.4.7 Increasing the number of cyclic points (Remote net ver.2 mode, Remote net additional
mode)
Occupies 1 station
Occupies 2 stations
Occupies 3 stations
Occupies 4 stations
4 - 45
This function increases the number of cyclic points in the CC-Link system.
When increasing the number of cyclic points, select one from the following two modes.
Remote net ver.2 mode ................... Mode used for configuring a new system
Remote net additional mode............ Mode used for incorporating an additional Ver.2
The number of cyclic points per station can be increased as indicated in the following
table.
Remote I/O (RX, RY)
Remote register (RWw, RWr)
Remote I/O (RX, RY)
Remote register (RWw, RWr)
Remote I/O (RX, RY)
Remote register (RWw, RWr)
Remote I/O (RX, RY)
Remote register (RWw, RWr)
REMARK
In the remote net ver.1 mode, the number of cyclic points cannot be increased.
compatible slave station into the existing Ver.1
system
Table 4.7
Expanded cyclic setting
single double
32 points 32 points
4 points 8 points
64 points 96 points
8 points 16 points
96 points 160 points
12 points 24 points
128 points 224 points
16 points 32 points
MELSEC
quadruple octuple
64 points 128 points
16 points 32 points
192 points 384 points
32 points 64 points
320 points 640 points
48 points 96 points
448 points 896 points
64 points 128 points
4 - 45