Mitsubishi Electric Q81BD-J61BT11 User Manual page 58

4 FUNCTIONS
Personal computer
Program
mdReceive
Personal computer
Program
mdSend
4 - 4
[Remote input]
2) The input status of each of the remote I/O stations is automatically stored (for
each link scan) in the master station's "remote input RX" buffer memory.
3) The program uses the mdReceive function to read the input status stored in
the "remote input RX" buffer memory.
Master station
CC-Link Ver.2 board
Remote input RX
RX0F to RX00
3)
RX1F to RX10
RX2F to RX20
RX3F to RX30
RX4F to RX40
to
RX7FF to RX7F0
[Remote output]
4) The program uses the mdSend function to write the on/off information to the
"remote output RY" buffer memory.
5) The output status stored in the "remote output RY" buffer memory is output
automatically (for each link scan) to the remote I/O stations.
Master station
CC-Link Ver.2 board
Remote output RY
RY0F to RY00
RY1F to RY10
RY2F to RY20
RY3F to RY30
RY4F to RY40
4)
RY5F to RY50
RY6F to RY60
RY7F to RY70
RY8F to RY80
to
RY7FF to RY7F0
Remote I/O station
(Station number 1:
occupies 1 station)
2)
X0F to X00
2)
16-point module
Remote I/O station
(Station number 3:
occupies 1 station)
5)
Y0F to Y00
5)
16-point module
MELSEC
Remote I/O station
(Station number 2:
occupies 1 station)
X0F to X00
X1F to X10
32-point module
Remote I/O station
(Station number 4:
occupies 1 station)
Y0F to Y00
Y1F to Y10
32-point module
4 - 4