APPENDIX
Appendix 7.1.2 Backing up parameters
(End)
App - 57
The following describes the procedure for backing up parameters.
(1) Activate the "Parameter backup/restore tool."
(Refer to Appendix 7.)
(2) Select the <<Parameter backup>> in the "Parameter
backup/restore tool" dialog box.
Enter the destination where the parameters are to be
backed up in the "Parameter file setting" field.
You can also specify the backup destination in the "Open
File" dialog box by clicking the Browse button.
(3) After specifying the backup destination, click the
Backup button. The confirmation dialog box is
displayed.
Click the Yes button. The parameters are backed up to
the specified file.
(4) When the backup ends successfully, the dialog box on
the left is displayed.
Click the OK button to end the backup.
MELSEC
App - 57