Note:
(1) Supported on PCB rev.A3 or higher.
(2) The SDR information are read-only.
(3) The SEL storage is not supported random access.
Not available means that an additional onboard EEPROM is
required to store information. This requires a modification of the
A3 version board - the A2 version board does not have the
EEPROM.
IPMI Address Map
The IPMI address of the SBC is defined by GA pins which is
relative to the physical slot the SBC is installed on. The following
table shows the relationship between the IPMI address and the
Slot number SBC installed.
Address (Hex)
64
CompactPCI Slot
B0
Peripheral Slot1
B2
Peripheral Slot2
B4
Peripheral Slot3
B6
Peripheral Slot4
B8
Peripheral Slot5
BA
Peripheral Slot6
BC
Peripheral Slot7
Appendix
Need help?
Do you have a question about the cPCI-6810 and is the answer not in the manual?