Appendix C - Power Consumption
Hardware Environment:
Single or Dual LV P-III 933M or 1GHz
Memory: 1GB (512MB x 2) or 1.5GB (512MBx3)
HDD: FUJITSU MHR2040AT 40GB installed on RTM (Max.
current requirement is 0.55A @ +5V
CompactFlash: PQI 64MB Flash Card
PMC card: ADLINK PMC-8615 Gigabit Ethernet Card
PMC VGA card: ADLINK PMC-8217V (only available with
CRUX-SP)
Software Environment:
OS: Windows 2000 Professional
KPOWER.EXE
HCT 9.5
Burn-In Test
Test Setup:
SBC power consumption data is measured with the RTM
installed, if not specified.
Single-CPU SBC is tested with PMC-8217V and PMC-8615
installed, dual-CPU SBC is tested with PMC-8615 installed.
The value with HDD is tested with KPOWER, HCT and
BrunIn in Win2000. The typical and maximum values are
shown.
The value without HDD is tested under DOS without running
anything. The typical and maximum values are shown.
The power requirements of cPCI-6820 series products are shown
in the following table:
68
Appendix
Need help?
Do you have a question about the cPCI-6810 and is the answer not in the manual?