Specifications Of Cpci-R6820 Rtm - ADLINK Technology cPCI-6810 User Manual

Cpci-6810/6820 series 6u compactpci dual/single pentium tm iii sbc and rear i/o transition modules
Hide thumbs Also See for cPCI-6810:
Table of Contents

Advertisement

backup by a separate 3V coin cell battery (PANSONIC
CR2032 or compatible).
IPMI Interface
Supports PICMG 2.9 secondary system managing bus.
Implements IPMI functions as defined in the IPMI
specification v1.0.
Qlogic Zircon CP Baseboard Management Controller
(BMC) with 14KB internal SRAM, 1MB external flash ROM.
Front Panel LED Indicators and Reset
Four LEDs on the front panel including storage access LED
(RED), Power LED (GREEN), hot-swap status (Blue), and
watchdog timer LED (Yellow).
Four LEDs to indicate GbE ports status including speed
(yellow) and link/activity (green).
Flush tact switch for system reset.
PCI Bus and CompactPCI connectors
HiNT HB6 Universal PCI to PCI bridge.
64-bit/66MHz, supporting four bus-mastering devices.
32-bit/33MHz, supporting seven bus-mastering devices.

Specifications of cPCI-R6820 RTM

Form Factor
Standard 6U CompactPCI rear I/O (board size:
233.35x80mm
1-slot (4TE/HP, 20.32mm) wide, include space of 2.5" HDD.
Connection Interface
RTM signals are from CompactPCI rJ3 and rJ5 connectors,
without rJ1, rJ2, and rJ4. Use AB type connector on rJ5.
Introduction
2
).
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the cPCI-6810 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents