ADLINK Technology cPCI-6810 User Manual page 30

Typical Current and
Maximum Current
cPCI-6810A/1G
(Without PMC, VGA
cards & RTM)
cPCI-6810/1G
with HDD
cPCI-6820A/P9
cPCI-6820A/P9
with HDD
cPCI-6820B/1G
cPCI-6820B/1G
with HDD
cPCI-6820B/1G
(Without PMC card)
cPCI-6820A /1G
Table 1-3: Power Requirement (Typical)
Test conditions
Single or Dual LV P-III 933M or 1GHz.
Memory: 1GB (512MB x 2) or 1.5GB (512MBx3).
HDD: FUJITSU MHR2040AT 40GB installed on RTM (Max.
current requirement is 0.55A @ +5V.
CompactFlash: PQI 64MB Flash Card.
PMC card: ADLINK PMC-8615 Gigabit Ethernet Card.
PMC VGA card: ADLINK PMC-8217V (only available with
CRUX-SP).
20
+5V +3.3V
(+/-5%) (+/-5%)
1.44A 3.64A
3.73A 14.636A
3.16A 4.76A
3.88A+HDD 14.636A
2.66A 4.36A
3.73A 16.526A
3.56A 5.36A
3.73A+HDD 16.526A
3.38A 4.98A
3.88A 16.526A
4.34A 5.92A
3.88A+HDD 16.526A
3.79A 5.26A
3.88A+HDD 16.526A
TBD TBD
3.88A 18.416A
+12V -12V
(+/-5%) (+/-5%)
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
3mA 0mA
8mA 0mA
Introduction