Setting Up A New Vns - Siemens HiPath C10 User Manual

6.9

Setting up a new VNS

Now that you are familiar with the VNS concepts, you can now set up a new VNS. Setting up a
new VNS involves the following general steps:
Step one – Create a VNS name
●
Step two – Define the topology parameters
●
Step three – Configure the VNS
●
For information on setting up a new VNS, see Chapter 7, "Virtual Network configuration".
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsintro.fm
Virtual Network Services
Setting up a new VNS
121