Table of Contents
Advertisement
7.7
Enabling multicast for a VNS
A mechanism that supports multicast traffic can be enabled as part of a VNS definition. This
mechanism is provided to support the demands of VoIP and IPTV network traffic, while still
providing the network access control.
Define a list of multicast groups whose traffic is allowed to be forwarded to and from the VNS.
The default behavior is to drop the packets. For each group defined, you can enable Multicast
Replication by group.
Before enabling multicast filters and depending on the topology of the VNS, you may
>
need to define which physical interface to use for multicast relay. Define the multicast
port on the IP Addresses screen of the Wireless Controller Configuration tab. For
more information, see Section 4.2.4, "Setting up the data ports", on page 53.
To enable multicast for a VNS:
1.
From the main menu, click Virtual Network Configuration. The Virtual Network
Configuration screen appears.
2.
In the left pane Virtual Networks list, click the VNS you want to enable Multicast for. The
Topology tab is displayed.
3.
Click the Multicast tab.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Virtual Network configuration
Enabling multicast for a VNS
165
Hide quick links:
Advertisement
Table of Contents
