System Configuration Overview - Siemens HiPath C10 User Manual

hwc_startup.fm
Configuring the HiPath Wireless Controller

System configuration overview

HiPath Wireless Controller (Rev.2)
Model Number
C100
C1000
Table 2 HiPath Wireless Controller product families
The HiPath Wireless Controller is available in the following product families:
HiPath Wireless Controller
Model Number
C2400 (Enterprise license)
C2400 (Pro license)
Table 3 HiPath Wireless Controller product families
4.1 System configuration overview
The following section provides a high-level overview of the steps involved in the initial
configuration of your system:
Step 1 – Before you begin configuration
Research the type of WLAN deployment that is required.
Step 2 – Preparing the network
Ensure relevant DHCP servers and RADIUS servers (if applicable) are available and
configured.
44
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Specifications
Four fast-Ethernet ports (10/100 BaseT),
●
supporting up to 75 Wireless APs
One management port (10/100/1000 BaseT)
●
One console port (DB9 serial)
●
Power supply redundant (R)
●
Two GigE ports (dual 1GB SX network
●
interfaces) supporting up to 200 Wireless APs
One management port (10/100/1000 BaseT)
●
One console port (DB9 serial)
●
Power supply redundant (R)
●
Specifications
Four GigE ports supporting up to 200 wireless APs
●
One management port (10/100 BaseT)
●
One console port (DB9 serial)
●
Power supply standard (R)
●
Four GigE ports supporting up to 100 wireless APs
●
One management port (10/100 BaseT)
●
One console port (DB9 serial)
●
Power supply standard (R)
●
A31003-W1040-U101-1-7619, July 2006 DRAFT