Siemens HiPath C10 User Manual page 192

hwc_controlleravailmobility.fm
Availability, mobility, and controller functionality
Availability overview
An alternate method to setting up APs includes:
1. Add each wireless AP manually to each HiPath Wireless Controller.
2. From the AP Properties screen, click Add Wireless AP.
3. Define the wireless AP and click Add Wireless AP.
Manually defined APs will inherit the AP default configuration settings.
If two HiPath Wireless Controllers are paired and one has the Allow All option
7
set for Wireless AP registration, all Wireless APs will register with that HiPath
Wireless Controller.
To set the primary or secondary HiPath Wireless Controllers for availability:
1. From the main menu, click Wireless AP Configuration. The Wireless APs screen
appears.
2. In the left pane, click AP Registration. The Wireless AP Registration screen appears.
3. To enable availability, select the Paired option.
192
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT