Siemens HiPath C10 User Manual page 199

3. To enable mobility for this controller, select the Enable Mobility checkbox. The controller
mobility options appear.
4. Select the This Wireless Controller is a Mobility Manager option. The mobility manager
options appear.
5. In the Port drop-down list, select the interface on the HiPath Wireless Controller to be used
for the mobility manager process. Ensure that the selected interface is routable on the
network.
6. In the Heartbeat box, type the time interval (in seconds) at which the mobility manager
sends a Heartbeat message to a mobility agent. The default is 5 seconds.
7. In the SLP Registration drop-down list, select whether to enable or disable SLP
registration.
8. In the Permission list, select the agent IP addresses you want to approve that are in
pending state, by selecting the agent and clicking Approve. New agents are only added to
the domain if they are approved.
You can also add or delete controllers that you want to be part of the mobility domain. To
add a controller, type the agent IP address in the box, and then click Add. To delete a
controller, select the controller in the list, and then click Delete.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Mobility manager
199