Defining The Service Class For The Vns - Siemens HiPath C10 User Manual

At this time, Layer 2 802.1d bits are not carried across the tunnel.
>
Wireless Controller C2400 supports functionality (CTP_QoS field) by which L2
priority flags for user traffic received from a core VLAN is copied into the CTP header
(CTP_QoS field) and passed to the AP to determine the corresponding access
class.
7.11.1

Defining the service class for the VNS

Service class is determined by the combination of the following operations:
The class of treatment given to a packet. For example, queuing or per hop behavior (PHB).
●
The packet marking of the output packets (user traffic and/or transport).
●
Service class name (number)
Network Control (7)
Premium (Voice) (6)
Platinum (video) (5)
Gold (4)
Silver (3)
Bronze (2)
Best Effort (1)
Background (0)
Table 17 Service class
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Configuring Quality of Service (QoS)
Priority level
7 (highest priority)
6
5
4
3
2
1
0 (lowest priority)
hwc_vnsconfiguration.fm
Virtual Network configuration
The HiPath
183