Modifying Wireless Ap Settings - Siemens HiPath C10 User Manual

C10/c100/c1000 ap26 series wireless controller, access points and convergence software, v4.0
Hide thumbs Also See for HiPath C10:
Table of Contents

Advertisement

3.
In the Serial # box, type the unique identifier.
4.
From the Hardware Type drop-down list, select the hardware type of the Wireless AP.
5.
In the Name box, type a unique name for the Wireless AP.
6.
In the Description box, type descriptive comments for the Wireless AP.
7.
In the Port # drop-down list, select the Ethernet port through which the Wireless AP can
be reached.
8.
Click Add Wireless AP. The wireless AP is added and registered.
9.
Click Close.
5.5

Modifying wireless AP settings

Wireless APs are added with default settings, which you can adjust and configure according to
your network requirements. In addition, you can modify the properties and the settings for each
radio on the wireless AP.
You can also locate and select APs in specific registration states to modify their settings. For
example, this feature is useful when approving pending APs when there are a large number of
other APs that are already registered. From the Access Approval screen, the administrator can
click Pending to select all pending APs, then click Approve to approve all selected APs.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_apstartup.fm
Configuring the wireless AP
Modifying wireless AP settings
81

Advertisement

Table of Contents
loading

Table of Contents