Table of Contents
Advertisement
5.
From the Time Zone Region drop-down list, select the appropriate time zone region for
the selected country.
6.
To apply your changes, click Apply Time Zone.
To set system time parameters:
1.
From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2.
In the left pane, click Network Time. The Network Time screen appears.
3.
To use system time, select the Use System Time radio button.
4.
Type the time setting in the Use System TIme box, using the mm-dd-yyyy hh:mm format.
5.
To apply your changes, click Apply.
To set Network Time Protocol:
1.
From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2.
In the left pane, click Network Time. The Network Time screen appears.
3.
To use Network Time Protocol, select the Use NTP radio button.
4.
In the Use System TIme box, type the time setting using the mm-dd-yyyy hh:mm format.
5.
In the Time Server 1 box, type the IP address or FQDN of a standard NTP Time Server.
You can repeat this step for the Time Server 2 and Time Server 3 boxes.
6.
To apply your changes, click Apply.
8.5
Configuring Check Point event logging
The HiPath Wireless Controller can forward specified event messages to an ELA server using
the OPSEC ELA protocol - Event Logging API (Application Program Interface). On the ELA
server, the event messages are tracked and analyzed, so suspicious messages can be
forwarded to a firewall application that can take corrective action.
Check Point created the OPSEC (Open Platform for Security) alliance program for security
application and appliance vendors to enable an open industry-wide framework for inter
operability.
When ELA is enabled on the HiPath Wireless Controller, it forwards the specified event
messages from its internal event server to the designated ELA Management Station on the
enterprise network.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Availability, mobility, and controller functionality
Configuring Check Point event logging
hwc_controlleravailmobility.fm
205
Hide quick links:
Advertisement
Table of Contents
