Siemens HiPath C10 User Manual page 97

To configure the DRM software:
1. From the main menu, click Wireless AP Configuration. The HiPath Wireless AP screen
appears.
2. In the left pane, click DRM.
3. Confirm the Enable DRM checkbox is selected.
4. To refresh the wireless APs list, click Save. The list is populated with the wireless APs.
5. From the list of registered wireless APs, select the checkbox corresponding to the wireless
AP you want to configure for DRM. The DRM properties are populated with default values
when DRM is enabled.
6. In the Coverage drop-down list, select:
Std – (Standard Coverage) Adjusts the range to the client that is the most distant, as
●
indicated by its signal strength.
Shpd – (Shaped Coverage) Adjusts the range based on neighboring wireless APs.
●
7. If applicable, from the Avoid WLAN drop-down list, select on.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_apstartup.fm
Configuring the wireless AP
Modifying wireless AP settings
97