Bridging Traffic Locally - Siemens HiPath C10 User Manual

Turbo Voice –
●
does.>>:
5. To define the service class and DSCP marking for the VNS, select the Priority Override
checkbox:
Service class – From the drop-down list, select the appropriate priority level:
●
Network control (7) – The highest priority level.
●
Premium (Voice) (6)
●
Platinum (5)
●
Gold (4)
●
Silver (3)
●
Bronze (2)
●
Best Effort (1)
●
Background (0) – The lowest priority level
●
DSCP marking –
●
6. If you want to assign a service class to each DSCP marking, clear the Priority Override
checkbox and define the DSCP service class priorities in the DSCP classification table.
7. The Advanced Wireless QoS options are only displayed if the WMM or 802.11e
checkboxes are selected:
Enable U-APSD checkbox –
●
Use Global Admission Control for Voice (VO) checkbox –
●
explanation>>>
Voice priority is required for use with SpectraLink phones.
>
8. To save your changes, click Save.
7.12

Bridging traffic locally

A VNS must first be setup before traffic can be bridged locally. For more information, see
Chapter 6, "Virtual Network Services".
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
<<< attention reviewer: need descriptions of what this option
<<<need def. explanation>>>
hwc_vnsconfiguration.fm
Virtual Network configuration
Bridging traffic locally
<<<need def.
185