3.
In the Security Mode section, select one of the following:
Allow all Wireless APs to connect
●
Allow only approved Wireless APs to connect
●
The Allow all Wireless APs to connect option is selected by default. For more
information, see Section 5.3.1, "Security mode", on page 77.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Configuring the wireless AP
Configuring the wireless APs for the first time
hwc_apstartup.fm
79