Siemens HiPath C10 User Manual page 255

5. To launch the backup with the selected items, click on the Backup Now button.
6. In the dialog box that appears, confirm the backup. The items are backed up.
To upload a new backup:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. From the left pane, click Software Maintenance. The HWC Software tab appears.
3. Click the Backup tab.
4. To upload a new backup, which will be added to the list, in the Upload Backup area type
the following:
FTP Server – The IP of the FTP server to retrieve the image file from.
●
User ID – The user ID that the controller should use when it attempts to log in to the
●
FTP server.
Password – The corresponding password for the user ID.
●
Confirm – The corresponding password for the user ID to confirm it was typed
●
correctly.
Directory – The directory on the server where the image file will be stored.
●
Filename – The name that will be given to the image file when it is stored on the FTP
●
server.
Platform – The AP hardware type to which the image applies. The are several types
●
of AP and they require different images.
5. Click Upload. The backup is uploaded and added to the list.
To delete a backup:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. From the left pane, click Software Maintenance. The HWC Software tab appears.
3. Click the Backup tab.
4. To delete a backup from the list, in the Available Backups list, click the backup.
5. Click Delete. The backup is removed from the list.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Performing HiPath Wireless Controller software maintenance
Performing system maintenance
hwc_ongoing.fm
255