Siemens HiPath C10 User Manual page 200

hwc_controlleravailmobility.fm
Availability, mobility, and controller functionality
Mobility manager
9. Select the Security Mode option:
Allow all mobility agents to connect – All mobility agents can connect to the mobility
●
manager.
Allow only approved mobility agents to connect – Only approved mobility agents
●
can connect to the mobility manager.
10. To save your changes, click Save.
If you set up one HiPath Wireless Controller on the network as a mobility
>
manager, all other HiPath Wireless Controllers must be set up as mobility
agents.
To designate a mobility agent
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. In the left pane, click Mobility Manager. The Mobility Manager Settings screen appears.
3. To enable mobility for this controller, select the Enable Mobility checkbox. The controller
mobility options appear,
4. Select the This Wireless Controller is a Mobility Agent option. The mobility agent
options appear.
200
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT