Advertisement
Quick Links
Edge Controller F200 - CFG3.F200
Product Data Sheet
Edge Controller F200 for the cloud integration of FIN Framework, FIN Stack
and/or third-party systems.
●
2-port Ethernet switch for LAN (includes daisy chaining)
●
1-port Ethernet for WAN
●
USB interface for 4G dongles
●
Operating voltage AC 24 V or DC 24 V
●
Mounting on standard rails or on the wall
●
Plug-in screw terminal blocks
●
Multi-site management
●
Remote operation and monitoring
●
Alarm treatment
●
Remote tool access, update, and configuration via Siemens Cloud Services
Advertisement
Related Manuals for Siemens CFG3.F200
Summary of Contents for Siemens CFG3.F200
- Page 1 Operating voltage AC 24 V or DC 24 V ● Mounting on standard rails or on the wall ● Plug-in screw terminal blocks ● Multi-site management ● Remote operation and monitoring ● Alarm treatment ● Remote tool access, update, and configuration via Siemens Cloud Services...
- Page 2 It can also securely transmit data to the cloud over cable networks or over mobile networks (e.g. 4G: With a router). 4G USB Dongle support is available in addition (see “Accessories”). Type summary Type Order number Description CFG3.F200 S55842-Z133 Embedded FIN Framework/FIN Stack device Equipment combinations Accessories...
-
Page 3: Technical And Mechanical Design
Technical and mechanical design The compact build can be mounted on standard rails or walls. Plastic housing LEDs for communication and status Service button 4 a) 2-port Ethernet switch with 2 LEDs per port 4 b) 1-port Ethernet interface with 2 LEDs for WAN (Internet access) Plug-in terminal blocks with screw terminals Power supply... - Page 4 Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. ● Observe national provisions and comply with the appropriate safety regulations. Mounting position and ambient temperature The devices can be snapped onto standard rails or screwed onto a flat surface. Plug-in screw terminals connect power and interfaces (except for Ethernet).
-
Page 5: Commissioning / Service
Commissioning / service NOTICE When using a 4G dongle Reboot the device after a 4G dongle has been connected. For details see 4G Dongle Setup (A6V12059208). Technical data Power supply Operating voltage 24 V AC (24 V≃, ⏊, AC 24 V -15 / +20 % (SELV / PELV) or AC 24 V Class 2 (US) 48…63 Hz Operating voltage 24 V DC... - Page 6 Interfaces Ethernet interfaces Plug 3 x RJ45, shielded Interface type 10Base-T / 100Base-TX, IEEE 802.3 compatible Bit rate 10/100 Mbps, autosensing Protocol BACnet on UDP/IP, Modbus TCP/IP, KNX IP, Haystack over RESTful API, OPC UA, oBix, Sedona, and SQL. Cabling, cable type 10 Mbps: Min.
-
Page 7: Fcc Statement
(RoHS compliance, materials composition, packaging, environmental benefit, disposal). Documents can be downloaded at http://siemens.com/bt/download. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 8 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation FCC Caution: Changes or modifications not expressly approved by Siemens Switzerland Ltd. could void user authority to operate the equipment. United States representative https://new.siemens.com/us/en/products/buildingtechnologies/home.html...
- Page 9 4 (0.16") 26.5 (1.04") 45 (1.77") 49 (1.91") 129 (5.08") 69.5 (2.73") 144 (5.67") 74.5 (2.93") Disclaimer Please see this link for more information about OSS for the CFG3.F200.