Siemens HiPath C10 User Manual page 89

To modify the wireless AP's radio properties:
1. From the main menu, click Wireless AP Configuration. The HiPath Wireless AP screen
appears.
2. Click the appropriate wireless AP in the list.
3. Click the radio tab you want to modify.
Each tab displays the radio settings for each radio on the wireless AP. If the radio has been
assigned to a VNS, the VNS names and MAC addresses appear in the Base Settings area.
The HiPath Wireless Controller C2400 can support up to 64 VNSs.
Controller C1000 can support up to 50 VNSs, the C100 can support up to 32 VNSs, and
the C10 can support up to 16.
VNSs in a system. Each AP can be the subject of 8 VNS assignments (corresponding to
the number of SSIDs it can support). Once a radio has all 8 slots assigned, it is no longer
eligible for further assignment.
The BSS Info area is view only. After VNS configuration, the Basic Service Set (BSS) area
displays the MAC address on the wireless AP for each VNS and the SSIDs of the VNSs to
which this radio has been assigned.
If applicable, click the 802.11b/g tab to modify the radio properties.
●
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
The AP radios can be assigned to each of the configured
hwc_apstartup.fm
Configuring the wireless AP
Modifying wireless AP settings
The HiPath Wireless
89