hwc_mitigator.fm
Working with the Mitigator
Enabling the Analysis and data collector engines
10.2
Enabling the Analysis and data collector engines
Before using the Mitigator, you must enable and define the Analysis and data collector engines.
To enable the Analysis engine:
1.
From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2.
In the left pane, click Mitigator. The Mitigator Configuration screen appears.
3.
To enable the Mitigator Analysis Engine, select the Mitigator Analysis Engine checkbox.
4.
To enable the Mitigator Data Collection Engine on this HiPath Wireless Controller, select
the Enable Local Mitigator Data Collection Engine checkbox.
5.
To identify the remote RF Data Collector Engine that the Analysis Engine will poll for data,
type the IP address of the HiPath Wireless Controller on which the remote Data Collector
resides in the IP Address box. The local IP address is displayed by default.
6.
For the data collection engine:
218
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT