Topology Of A Vns - Siemens HiPath C10 User Manual

C10/c100/c1000 ap26 series wireless controller, access points and convergence software, v4.0
Hide thumbs Also See for HiPath C10:
Table of Contents

Advertisement

hwc_vnsintro.fm
Virtual Network Services

Topology of a VNS

Department (such as Engineering, Sales, Finance)
Role (such as student, teacher, library user)
Status (such as guest, administration, technician)
For each user group, you should set up a filter ID attribute in the RADIUS server, and then
associate each user in the RADIUS server to at least one filter ID name. You can define specific
filtering rules, by filter ID attribute, that will be applied to user groups to control network access.
Filtering is applied by the controller. Filter ID assignments is a configuration option, and not a
requirement to setup per user filter ID definitions. If a filter is not returned by the Access-Accept
confirmation for a particular user, the controller uses the default filter profile for the VNS as the
applicable filter set.
6.3
Topology of a VNS
Before you
decide if a VNS will participate in a VLAN and
settings that will apply to all VNS definitions. For example, global settings can include
identifying the location of the RADIUS servers and enabling priority traffic handling for voice-
over-internet traffic and dynamic authorization server support.
The type of network assignment determines all the other factors of the VNS. There are two
options for network assignment:
SSID:
Has Captive Portal authentication, or no authentication
Requires restricted filtering rules before authentication
Requires filtering rules for group filter IDs after authentication. A default filter applies if
a more specific filter is not indicated by the RADIUS Access-Accept response.
Used for a VNS supporting wireless voice traffic (QoS)
Used for a VNS supporting third-party APs
Has WEP and WPA-PSK privacy
AAA:
Has 802.1x authentication
Requires filtering rules for group filter IDs and default filter. A definition of group filter
IDs is optional. If a filter is not specified or not returned by the Access-Accept
response, the default filter group is applied.
Has WEP and WPA privacy
Controller is involved in authenticating users. 802.1x packets for AAA assignment are
forwarded by the AP to the controller, through to the RADIUS server.
110
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
configure a VNS, define the global
A31003-W1040-U101-1-7619, July 2006 DRAFT

Advertisement

Table of Contents
loading

Table of Contents