Siemens HiPath C10 User Manual page 166

hwc_vnsconfiguration.fm
Virtual Network configuration
Enabling multicast for a VNS
4. To enable the multicast function, click Enable Multicast Support.
5. Define the multicast groups by selecting one of the radio buttons:
IP Group – Type the IP address range.
●
Defined groups – Select from the drop-down list.
●
6. Click Add. The group is added to the list above.
7. To enable the wireless multicast replication for this group, select the corresponding
Wireless Replication checkbox.
8. To modify the priority of the multicast groups, select the group row and click the Up or
Down buttons.
A Deny All rule is automatically added as the last rule, IP = *.*.*.* and the Wireless
Replication checkbox is not selected. This rule ensures that all other traffic is dropped.
9. To save your changes, click Save.
166
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT